 Aerospace, Automotive & Marine Parts |
Home About Technical & FAQ How To Buy & Contact Terms & Conditions of Sale Links |
|
Split Screen Van
Bay Window Van
T25 Wedge Van
Beetle
Karmann-Ghia
Thing 181
Type3 Variant
Engine Parts
Carburettor Parts
NUTS AND BOLTS
TOOLS
ELECTRICAL PARTS
Air Cooled Porsche
Rover V8 Parts
Ford Kits
BMC Era Car Parts
Land Rover Kits
| Full Set Of Engine Rebuilding Kits | |||
| ENG.SET.BASIC | Set Of Stainless Kits For The VW Type1 Beetle Engine | ||
| ENG.SET.BIG | Set Of Stainless Kits For The VW Type1 Beetle Engine Includes Stainless Studs, R9 Fuel Hose, Stainless Pipe Clamps & Exhaust Gaskets |
||
| ENG.SET.PRO | Set Of Stainless Kits For The VW Type1 Beetle Engine Same as ENG.SET.BIG But With ALL METAL Lock-Nuts Substituted Into Certain Areas |
||
| Stainless Cooling System Tinware Screw and Fitting Kits | |||
| - Bags Of 25 Screws For Spares And Repairs In Various Head Styles | |||
| ENG-1.1.1 | Tinware Screws - Bag of 25 - Std. Slotted Cheese-Head | 
| |
| ENG-1.1.2 | Tinware Screws - Bag of 25 - POZI Pan Head | |
|
| ENG-1.1.3 | Tinware Screws - Bag of 20 - Socket Cap-Head (Hexagon / Allen Key Drive) | |
|
| ENG-1.1.4 | Tinware Screws - Bag of 25 - Button-Head (Hexagon / Allen Key Drive) | |
|
| - Full Sets Of Screws To Fit ALL Of Your Tinware To Your VW Engine | |||
| ENG-1.2.1 | FULL Tinware Screw, Bolt, Nut & Washer Set For T1 Engines SLOTTED Utilising Stock Looking Slotted Cheese Head Screws |
|
|
| ENG-1.2.2 | FULL Tinware Screw, Bolt, Nut & Washer Set For T1 Engines BUTTON HEAD Utilises Socket Button Head Screws - Uses Hexagon / Allen Key |
|
|
| ENG-1.2.3 | FULL Tinware Screw, Bolt, Nut & Washer Set For T1 Engines BLACKED Utilising Stock Looking Slotted Cheese Head Screws With A BLACK Coating |
|
|
| ENG-1.2.4 | FULL Tinware Screw, Bolt, Nut & Washer Set For T1 Engines SOCKET CAP Utilising Sporty Looking Socket-Button Screws |
||
| ENG-1.2.5 | FULL Tinware Screw, Bolt, Nut & Washer Set For T1 Engines POZI Utilising Mexican Style POZI Head Screws |
|
|
| Stainless Exhaust & Exhaust Manifold Fittings | |||
| - Exhaust NUT Options | |||
| M8 11ATF | Thin Wall Plain Nuts - 11mm Across The Flats (ATF) - Stainless Steel A Thinner Nut For Easier Tool Access |
|
|
| M8 AERO | 10 Pack M8 Aerotight All Metal Lock Nuts - Stainless Steel An Aerospace Quality "Stiff" Self Locking Nut Designed For HIGH Temperatures |
|
|
| M8 Nut | 10 Pack M8 Plaint Nuts - Stainless Steel Regular Plain Old Fashioned Nothing Special About Them Nuts |
|
|
| - Exhaust Studs - With Or Without Nuts | |||
| ENG-2.3.1 | T1 / T3 Motor Exhaust Header Threaded Studs With Plain Nuts Replacement Studs Have An Allen Key Drive For Ease Of Installation PLAIN Nuts Make This Kit The Simple Economical Option |
|
|
| ENG-2.3.2 | T1 / T3 Motor Exhaust Header Threaded Studs With ALL METAL Locknuts Replacement Studs Have An Allen Key Drive For Ease Of Installation High Performance High Temperature Shakeproofing Locknuts - Best On Market |
|
|
| ENG-2.5.1 | Type4 Motor Exhaust Header Studs And Nuts Replacement Studs Have An Allen Key Drive For Ease Of Installation For Exhaust Ports With M8 Studs - NOT M9/M8 Double-Ended Studs |
||
| M9-M8 | Type4 Motor Exhaust Header Studs And Nuts - Special M9 At One End Replacement Studs Have An Allen Key Drive For Ease Of Installation For Exhaust Ports With M9 Threads Into The Cylinder Head |
|
|
| - GASKET Options | |||
| ENG-2.6.1 | Type1 / Type3 Motor Exhaust Gaskets High Performance BRITISH MADE Gaskets - Best On Market |
|
|
| ENG-2.7.1 | Triangular (SMALL) Merged 4 Into 1 Header Gaskets High Performance BRITISH MADE Gaskets - Best On Market |
|
|
| ENG-2.7.2 | Triangular Flange Bolt-Up Hardware 3x Bolts With Aerotight Quality Lock Nuts |
|
|
| Stainless Ancilliaries Fittings : Generator Stand & Generator, Fuel Pump, Distributor, Air-Lines etc. | |||
| ENG-3.1.1 | Nuts, bolts & washers for basic fitting of ancilliaries | ||
| ENG-3.2.1 | Type4 Engine DTM Shroud Oil-Cooler Air-Line Clamps | ||
| ENG-3.3.1 | Type1 Beetle/Bus Engine Heater-Hose (To shroud & heat exchangers) Clamps x 4 | |
|
| ENG-3.4.1 | Type1 Motor Generator Stand Mounting Studs, Nuts & Washers Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-3.5.1 | Type1 Motor Fuel Pump Mounting Studs, Nuts & Washers Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-3.6.1 | Type1 Motor Distributor Clamp Mounting Stud, Nut & Washers Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-3.7.1 | A Set Of 10 STAINLESS Generator Pulley Wheel Tension Setting Shims | |
|
| Stainless Inlet Manifold & Carburettor Fittings | |||
| ENG-4.1.2 | Studs and ALL METAL Lock-Nuts For 1600 TwinPort Inlet Manifolds Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-4.1.3 | Studs and Nuts For Type 4 Inlet Manifolds Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-4.2.1 | M6 Studs For 1200/1300/1500 Single-Port Inlet Manifolds Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| ENG-4.2.2 | M8 Studs For 1600 Twin-Port Inlet Manifolds Replacement Studs Have An Allen Key Drive For Ease Of Installation |
||
| Stainless Steel Oil System Component Fitting Kits | |||
| ENG-5.1.1 | Hydraulic Sealing Washers & Acorn Nuts For Fitting The Sump Plate Hydraulic Sealing Washers Are Stainless Steel With A VITON Self-Centering Inner Sealing Ring |
||
| ENG-5.1.2 | Sealing Washers, STUDS And Acorn Nuts For Fitting The Sump Plate Hydraulic Sealing Washers Are Stainless Steel With A VITON Self-Centering Inner Sealing Ring |
||
| High Tensile Engine Fittings | |||
| ENG-6.1.1 | 6x M8 Clutch Bolts (Hexagon Head)(12:9 HT Steel)(Anti-Corrosion Coated) For Type 1 and 4 clutches to 200mm flywheels |
|
|
| ENG-6.1.2 | 6x M8 Clutch Bolts (Socket Cap)(12:9 HT Steel)(Anti-Corrosion Coated) For Type 1 and 4 clutches to 200mm flywheels |
|
|
| ENG-6.2.1 | 6x M7 Clutch To Flywheel Mounting Bolts (12:9 HT Steel self colour) For Type 4 Motor clutches to 215mm flywheels |
|
|
| Fuel System Components | |||
| ENG 7.1.4 | ½ Metre of SAE J30R9 CODAN Fuel Hose : Inner Bore Diameter 5.6mm For Stock Type 1 engines with Solex Carburettors |
|
|
| COD 5.6 | 1 Metre of SAE J30R9 CODAN Fuel Hose : Inner Bore Diameter 5.6mm For Stock Type 1 engines with Solex Carburettors |
|
|
| ENG-7.1.1 | 1 ½ Metre of SAE J30R9 CODAN Fuel Hose : Inner Bore Diameter 5.6mm For Stock Type 1 engines with Solex Carburettors |
|
|
| ENG-7.1.2 | 2 ½ Metre of SAE J30R9 CODAN Fuel Hose : Inner Bore Diameter 5.6mm For Stock Type 1 engines with Solex Carburettors |
|
|
| 50m 5.6ID | 50 Meter Reel of SAE J30R9 CODAN Fuel Hose : Inner Bore of 5.6mm | ||
| 10 Lloyds Register / N.A.T.O. Approved Fuel Hose clamps - Size #9.5mm-#12mm | |||
| ENG-7.2.1 | 10 Stainless Steel Fuel Hose Clips - Size #11 For 5.6mm Inner Bore Hose | ||
| ENG-7.2.2 | 10 Stainless Steel Fuel Hose Clips - Size #12 For 5.6mm & 6mm Inner Bore Hose | ||
| ENG-7.2.3 | 10 Stainless Steel Fuel Hose Clips - Size #13 For 6mm Inner Bore Hose | ||
| ENG-7.2.4 | 10 Stainless Steel Fuel Hose Clips - Size #14 For 8mm Inner Bore Hose | ||
| ENG-7.3.1 | Package 1 : 1.5m R9 Grade Fuel Hose (5.6mm ID) & 10 STAINLESS Hose Clips For Stock T1 Engines - Single Solex Carbs - Beetle, Ghia, Bay Van, Split Van and Trekker\Thing | ||
| ENG-7.3.2 | Package 2 : 2.5m R9 Grade Fuel Hose (5.6mm ID) & 14 STAINLESS Hose Clips For Stock T3/T4 Engines - Twin Solex Carbs - Bay Van, Type 3 Squareback, Notchback & Variant | ||
| ENG-7.3.3 | Package 3 : 1.5m R9 Grade Fuel Hose (7mm ID) & 10 STAINLESS Hose Clips For Stock T2/T3 Engines - FUEL INJECTED - Bay Van, Type 3 Squareback, Notchback & Variant | ||