 Aerospace, Automotive & Marine Parts |
Home About Technical & FAQ How To Buy & Contact Terms & Conditions of Sale Links |
|
Split Screen Van
Bay Window Van
T25 Wedge Van
Beetle
Karmann-Ghia
Thing 181
Type3 Variant
Engine Parts
Carburettor Parts
NUTS AND BOLTS
TOOLS
ELECTRICAL PARTS
Air Cooled Porsche
Rover V8 Parts
Ford Kits
BMC Era Car Parts
Land Rover Kits
| Full Restoration Kits : A Full Set Of Kits To Restore Your VW Karmann-Ghia | |||
| Resto-4 | VW Karmann-Ghia Nut & Bolt Restoration Kit | ||
| KGH-Basics | Contains All Of The Parts In Our Main Resto Kits All Mixed Up In One Bag |  |
|
| Structural Appendages - Chassis, Body, Bumpers Wings etc. | |||
| KGH-1.1.1 | Chassis To Body Fitting Kit | |
|
| KGH-1.2.1 | Early Blade (Wrap Around) Style Bumper Iron Bolts | |
|
| KGH-1.3.1 | US Spec Wrap-Around Blade Bumper Fitting Kit | |
|
| KGH-1.3.2 | European Spec. Wrap-Around Blade Bumper Fitting Kit | ||
| KGH-1.3.3 | Later Style 'Europa' Bumper Fitting Kit | |
|
| Door Fittings | |||
| KGH-2.1.1 | Door Hinge Bolts (Both Doors) & Special Tool | |
|
| KGH-2.2.1 | Front Door Handles Screws | |
|
| KGH-2.3.1 | Door Lock Operating Lever & Linkages | ||
| KGH-2.4.1 | Door Post Striker Plates | |
|
| KGH-2.5.1 | Door Shut Guides | |
|
| KGH-2.6.1 | Door Window Winding Mechanisms | ||
| KGH-2.7.1 | Door Weather Strip | ||
| Bonnet And Engine Lid | |||
| KGH-4.1.1 | Bonnet Hinges & Catches | |
|
| KGH-4.2.1 | Engine Lid Hinges & Catches | |
|
| External Light Fittings & Other Functional Appendages | |||
| KGH-5.1.1 | Lowlight Tail-Light | ||
| KGH-5.1.2 | Banana Tail-Light | ||
| KGH-5.1.3 | Late Model 'Big' Tail-Light | ||
| KGH-5.2.1 | Front Bullet Indicators (Early Models) | |
|
| KGH-5.2.2 | Late Style Wrap-Around Style Front Indicator | ||
| KGH-5.3.1 | Number Plate Light & Housing | ||
| KGH-5.4.1 | Wing Mirror Mounting Bolts | ||
| KGH-5.5.1 | Horn Mounting Bolts | ||
| KGH-5.6.1 | Parking Reflector Fitting Kit | ||
| KGH-5.7.1 | Side Rear Reflector Fitting Kit | ||
| KGH-5.8.2 | Low-Light Headlamp Assembly Security Screws | |
|
| Interior Fixtures & Fittings | |||
| KGH-6.1.1 | Window Frames Inc. Pop-Out Window Catches | |
|
| KGH-6.2.1 | Rear Seat Securing Strap | ||
| KGH-6.3.1 | Rear Fresh Air Vent | ||
| KGH-6.4.1 | Door Pillar Ornamental Molding | ||
| KGH-6.5.1 | Coat Hooks | ||
| KGH-6.6.1 | Sunvisors & Rear View Mirror Fitting Screws | |
|
| KGH-6.7.1 | Interior Light Door Contact Switch Mounting Screws | |
|
| KGH-6.8.1 | Dashboard Grab Handle Nuts | ||
| KGH-6.9.1 | Gear Stick Shifter Bolts |
|
|
| KGH-6.10.1 | Speedometer / Voltage Regulator Fitting Screws |
|
|
| Externally Viewable Molding Fixtures & Trims | |||
| KGH-7.1.1 | 1/4 Window Pillar Molding Screws | ||
| KGH-7.2.1 | 1/4 Window Base Molding Screws | ||
| KGH-7.3.1 | 1/4 Window Main Molding Screws | |
|
| KGH-7.4.1 | Roof Molding Screws | ||
| KGH-7.5.1 | Door Window Molding Screws | ||
| KGH-7.6.1 | Front Fresh Air Inlet & Chrome Molding Screws | ||
| KGH-7.7.1 | Door Sill Molding (anti-scuff plate) Screws | |
|
| Electrical, Instrumentation, & Misc Fittings | |||
| VWB-7.1.1 | Split Pins (Cotter Pins) For Rear Wheel / Brake Hubs (10 pack) | |
|
| VWB-7.2.1 | Fuel Tank Sender Screws & Sealing 'O' rings | ||
| VWB-7.3.1 | Swing Axle Gaitor Clamp and Bolt Kit - Fits 1 Gaitor | ||
| VWB-7.5.1 | Pivot / Shaft Clips For Sloping Headlamps & Wiper Mechanisms - 5 Pack | |
|
| ELE-1.1.1 | Electrical Connectors - 50 Pack - 0-15Amp Low Current Wires | |
|
| ELE-1.1.2 | Electrical Connectors - 50 Pack - 15-30Amp Higher Current Wires | |
|
| ELE-1.1.5 | Connector Insulation Boots - 50 Pack | |
|
| ELE-1.4.1 | Electrical Connectors - 10 Pack - Headlamp "Flag" Connectors | |
|
| ELE-1.5.2 | Electrical Connectors - 5 Pack - Voltage Regulator X.Large Connectors | |
|
| ELE-1.6.1 | Electrical Earth Tabs - Single Tab | |
|
| ELE-1.7.1 | Electrical Earth Tabs - Double Tab | |
|
| Front Axle / Suspension High Tensile Bolts (10:9 with Dacromet Surface Finish) | |||
| KGH-10.1.1 | Shock Absorbers Bolts (90mm) | |
|
| KGH-10.1.2 | Shock Absorbers Bolts (Early Tapered) | |
|
| KGH-10.2.1 | Drop Arm Grub-Screws HT Kit (Pair) | ||
| KGH-10.3.1 | Front Beam HT Fitting Kit | |
|
| KGH-10.4.1 | Disc Brake Caliper HT Fitting Kit (Pair) | |
|
| KGH-10.5.1 | Steering Column Coupling | |
|
| Rear Axle / Suspension High Tensile Bolts (10:9 with Dacromet Surface Finish) | |||
| KGH-11.1.1 | Shock Absorbers Bolts (90mm) | |
|
| KGH-11.2.1 | Rear Spring Plate (To Axle) HT Fitting Kit | |
|
| KGH-11.3.1 | Rear Torsion Spring Cover Plate Bolts | |
|
| VWB-12.2.1 | CV Joint Bolts (12 Pack For One Driveshaft) | |
|
| VWB-12.2.2 | CV Joint Special Washers (6 Pack For One Driveshaft) | |
|